| Jardin Round Screen Room |
Benefit... |
The
Roof
|
|
Our
14 ounce vinyl tops are made in our own factory. |
|
Other
manufacturers use outside sources. Each top has to pass our
internal quality control. |
|
We
use a heavier, stronger vinyl with a smoother surface |
Stronger
vinyl lasts longer - Smoother surface cleans easier. |
|
The
vinyl panels are heat sealed together in both the free standing and
wall attached units, not sewn. |
Other manufacturers stitch their roof seams. Threads
at the seams will dry out and leaks may appear over time. Heat
sealing prevents seam leakage. |
|
Built into the Jardin roof is a top vent. While keeping the room completely waterproof it allows for venting the wind that typically gets caught in the room creating a huge umbrella effect potentially leading to frame and roof damage. |
Other
manufacturers do not have a top roof vent. This potentially leads to frame and roof damage. |
|
Roof
rafters are 3/4" aluminum tubing |
Lots
of built-in strength & weather-ability. |
|
The
top extends beyond the screen walls providing a roof overhang of
about 5" |
Rain
water will not run down the screens. Provides better protection from
the sun and rain. |
|
Roof
Tensioning System, built into the roof rafters within the 5"
overhang. |
Allows you to manually
(using a large thumb nut) adjust the tension of the roof, virtually
eliminating any water accumulation on the roof. |
|
Choice
of 6 colors: Green, Blue, Grey, Burgundy, White or Taupe |
Other manufacturers
typically offer a beige top only. We have a
color to suit your surroundings. |
|
Colors
can be mixed within the top for a premium |
Custom
made with your choice such as Green & White |
|
The Jardin |
Benefit... |
|
The
Screened Wall Panels |
|
1/8"
thick Extruded
Aluminum - Light in weight, but very strong |
|
We
do not use rolled formed steel, no rusting, ever. |
|
Panels
are never more than 44" in width |
Other
manufacturers typically have 50" panels. Panels
over 48" wide do not have sufficient rigidity and are easily
bent by children or the wind. |
|
Fiberglass
Screening, top to bottom |
Nylon
mesh (typically found in tents) will not allow sufficient air circulation. Our screening can be
easily replaced yourself if needed with readily available screen
kits at your local hardware store. |
|
Supporting
bar positioned at bottom third of panel |
Unobstructed
view. ALL other manufacturers set them at the center of the panel) |
|
Connected
by heavy duty flexible PVC vinyl hinges and then bolted together
with stainless steel brackets and hardware for superior rigidity |
Other manufacturers
depend on cables, plastic roof tip parts and Velcro to hold their
rooms together. |
|
Mounted
to your deck or patio with heavy gauge PVC channels in the both the
free standing and wall mounted kits. |
Assures
a solid and a secure attachment. This is one of the factors that
enables our screen enclosures to stand up to heavy weather. |
|
Sliding
Doors are a standard accessory in the wall attached 3 sided rooms and
single sliding doors are standard in the free standing square,
rectangular, and spa enclosures. *Note that a swing out door is
standard on all round models. |
44" doors allow easy entry and movement of larger items. Available on patio Plus models. |
|
Optional
Vinyl Wind Breaker panels (can be same color as the top) can
be used on the top 2/3 or bottom 1/3 of screen |
Supported
by an aluminum frame with spring loaded locks that hold it securely
on the inside of the screen. Easy to use. |
|
Optional
Mylar windows (As above but clear Mylar) |
Designed
for top 2/3 of screen panel, hinged in the middle for opening to
allow air circulation. Easily put on or removed. |
Do-It-Yourself Kits Toll Free Order line
We eliminate security risks!
Got Questions?
or
Save
Money - Do It Yourself
Canadian residents
US
Dollars /
Call
1.800.922.4760 to order
now!