Aluminum Patio Cover & Carport Details

Flat and W Pan Systems

Our aluminum flat pan and w pan cover systems are strong and versatile, ready to assemble, and delivered throughout the contiguous USA! Each system is engineered according to your local code requirements so whether you choose a W pan or a Flat Pan they are both equally as strong. However, the galvalume flat pans can span the longest of all the options.

The big difference between the two pan systems is what you see when you look up! With the W pan you see a corrugated shape ceiling. With the Flat pan your see a flat ceiling.

Need a walkable roof or one that reduces heat underneath? Explore our insulated panels and insulated patio cover systems.

Flat Pan Hard Top Patio Covers

Patio Cover Terminology

 
Patio Cover Terminology

Our patio cover and carport systems are designed with the handy homeowner in mind. The units are modular which enable many customizations and almost any size. To the left you will see a schematic that highlights some of the key elements and terminology used in describing and quoting our cover kits. Freestanding and wall attached units are available.

If you have questions or would like to discuss your project further, do not hesitate to call and speak to one of our product specialists - 1.800.922.4760.

Flat Pan Detail

 
Flat Pan Patio Cover

Flat Pans come in 2 types: 3" x 12" aluminum alloy and 3" x 8" galvalume. 3" x 12" Flat pan systems are available in .024, and .030 gauge thicknesses. 3" x 8" flat pan systems are available in 24ga. The thickness you require will be determined by the live load rating set out by your local building department.

Flat Pan Cutaway

 
Flat Pan Cutaway

The images to the left offer a break down of the materials that complete a flat pan cover. The standard flat pan cover will include 4 sided gutter fascia, stiffener bars and fascia corners as shown. Optional leaf guards are also available.

W Pan Detail

 
W Pan Patio Cover

3" x 16" W pan systems are available in .019", .025" and .032" gauge thicknesses. The thickness you require will be determined by the live load rating set out by your local building department

W Pan Cutaway

 
W Pan Cutaway

To the left you can see all the roof components of a w-pan patio cover system. The standard w pan cover will include 4 sided gutter fascia, stiffener bars and fascia corners as shown. Optional leaf guards are also available.

Gutter Fascia

 
front fascia gutter scupper

The front fascia gutter contains a full rain gutter system, including scuppers to direct the water run off away from your unit. Downspouts can also be used instead of the provided scuppers, but these would need to be purchased locally.

Fascia Colors

 
front fascia gutter colors

To the left are the color options for the fascia gutter. We have made an effort to provide representative images of the metal colors. However, due to all the possible variants -- light source, monitor quality, etc. -- we can not guarantee that the images accurately represent the true metal colors. Please take this into consideration if you are trying to color match materials.

Optional Leaf Guards

 
aluminum pan leaf guard

Leaf guards are available to prevent large debris such as leafs from entering the gutter and improve drainage. These can be supplied with the cover or purchased at a later date.

Warranty Information

 

Aluminum pans and extrusions are guaranteed not to peel, blister, flake, rust, chip, split or crack for 5 years. Subject to the limitations and conditions listed in the LK Aluminum warranty program.

Span Tables

 

Our units are pre-engineered roofing systems that have been approved by qualified, state approved engineers in 45 States. Our systems are rated according to 2011 International Building Codes. Snow drifting and wind uplift have not been considered in the wall attached units. If local specifications require such engineering, these standards can be met at an additional cost. Visit our snow load information page for more details.

The following tables are samples of the maximum spans for the most standard snow load conditions rated for 110MPH or less. There are many different load conditions with engineering (winds up to 150mph) available on request.

12" x 3" Flat Roof Panel - Maximum Panel Simple Span

Live Load
Wind Speed
.023"
.030"
20
90
8'6"
10'6"
30
90
7'6"
9'2"
40
90
5'8"
6'11"

8" Flat Roof Panel - Maximum Panel Simple Span

Live Load
Wind Speed
.023"
.030"
.040"
20
90
7'7"
9'3"
10'10"
30
100
6'7"
8'
9'3"
40
120
5'7"
6'10"
7'11"

16" x 3" W Roof Panel - Maximum Panel Simple Span

Live Load
Wind Speed
.019"
.025"
.032"
20
90
7'5"
10'1"
11'1"
30
90
6'6"
8'10"
9'8"
40
90
5'6"
7'6"
8'9"

HOW TO ORDER

There are a few ways you can order this product:

Superior Quality

Pro-grade patio covers, screen houses, screened in patio kits, Pegolas and gazebo kits. All sourced from premium manufacturers throughout the USA.

Read More
Superior Quality

Better Value

No need to design and and source material separately or spend thousands on a contractor. Complete DIY kits delivered to your door.

Read More
Better Value

Genuine Support

Not sure exactly what you need for your project? Require support during installation? We are just a short call or email away.

Read More
Genuine Support
Unable to find a DIY product on our site that you need for your next project? Let us know! We are always on the lookout for new products and happy to work with suppliers to bring contractor grade products direct to homeowners!
Contact Us

Covid-19 Impacts

Hello! We hope you and your loved ones are healthy and safe. Our ScreenHouse team is continuing to take every measure to ensure the safety of our employees and meet the needs of all our customers. COVID-19 has resulted in an unexpected surge in product sales.

People are using their backyards and gardens as a sanctuary and escape during these trying times. We love this! However, this has keeping up with demand a challenge. Be assured we are doing everything possible to work with our vendors so we can quickly ship out your orders.

Thank you for choosing ScreenHouse!